O P E R A T O R ’ S M A N U A L
ROTARY TILLERS
RT 1370
RT 1307
RT 1370 WR
RT 1380
RT 1307 WR
RT 1308
RT 1308 WR
RT 1310
RT 1380 WR
RT 1310 WR
Cod. F07010184 / Rev. 01 (2006-01)
TO THE DEALER:
Assembly and proper installation of this product is the responsibility of the Frontier dealer. Read manual
instruction and safety rules. Make sure all items on the Dealer’s Pre-Delivery Check List in the Operator’s
Manual are completed before releasing equipment to the owner.
The dealer must complete the Warranty Registration, located on the Frontier website. Warranty claims
will be denied if the Warranty Registration has not been completed.
TO THE OWNER:
Read this manual before operating your frontier equipment. The information presented will prepare you
to do a better and a safer job. Keep this manual handy for ready reference. Require all operators to read
this manual carefully and become acquainted with all the adjustment and operating procedures before
attempting to operate. Replacement manuals can be obtained from your selling dealer.
The equipment you have purchased has been carefully enginereed and manufactured to provide
dependable and satisfactory use. Like all mechanical products, it will require cleaning and upkeep.
Lubricate the unit as specified. Observe all safety information in this manual and safety decals on the
equipment.
For service, your authorized Frontier dealer has trained mechanics, genuine Frontier service parts, and
the necessary tools and equipment to handle all your needs.
Use only genuine Frontier service parts.Substitute parts will void the warranty and may not meet standards
required for safe and satisfactory operation. Record the model number and serial number of your equipment
in the spaces provided:
Model:
Date of Purchase
Serial Number: (see Safety Decal section for location)
Provide this information to your dealer to obtain correct repair parts.
Throghout this manual, the term IMPORTANT is used to indicate that failure to observe can cause
damage to equipment. The terms CAUTION, WARNING and DANGER are used in conjunction with the
Safety-Alert Symbol, (a triangle with an esclamation mark), to indicate the degree of hazard for items of
personal safety.
This Safety-Alert Simbol indicates a hazard and means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Indicates an imminently hazardous situation that, if not avoided,
will result in death or serious injury.
DANGER
Indicates a potentially hazardous situation that, if not avoided, could
result in death or serious injury, and includes hazards that are
exposed when guards are removed.
WARNING
Indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury.
CAUTION
Indicates that a failure to observe can cause damage to equipment.
Indicates helpful information.
IMPORTANT
NOTE
Cod. F07010184 / Rev. 01 (2006-01)
TECHNICAL SPECIFICATIONS
SKID VERSION
ROLLER VERSION
Model
Work/width Tractor HP Tractor HP
Weight
lbs.
Side
PTO
Speeds
Input
Hitch
Tines
STD
Rotor
Rotor
inches
min
max
Drive
shaft
gear box
speed
blades
flanges
Cat. “II”
Quick
coupler
Cat. “II”
Quick
coupler
Cat. “II”
Quick
coupler
Cat. “II”
Quick
RT 1370
RT 1370 WR
72
72
50
50
130
130
1373
1628
Gear
Gear
Gear
Gear
Gear
Slip
Clutch
2 + 2
Speed
540
540
540
540
540
L
L
L
L
L
6
6
6
6
6
8
RT 1380
RT 1380 WR
82
82
60
60
130
130
1487
1760
Slip
Clutch
2 + 2
Speed
9
RT 1307
RT 1307 WR
91
91
70
70
130
130
1602
1878
Slip
Clutch
2 + 2
Speed
10
11
13
RT 1308
RT 1308 WR
101
101
80
80
130
130
1707
2002
Slip
Clutch
2 + 2
Speed
coupler
Cat. “II”
Quick
RT 1310
RT 1310 WR
121
121
100
100
130
130
1918
2244
Slip
Clutch
2 + 2
Speed
coupler
TECHNICAL SPECIFICATIONS - HITCH
RT: Cat. «II» Quick Coupler
rpm
Cat. II Quick Coupler pin Ø mm 32 (inch 1.26)
rpm
540
A
B
175
214
262
143
21
19
17
23
19
21
23
17
Ø
Ø
=
mm 823 - inch 32,4 cat. 2
=
Cat. «II» Quick Coupler bushings Ø = 36,5 (inch 1.44)
Technical specifications - Page 4
SAFETY SIGNS
Safety-alert symbol
Read and recognize safety information.
Be alert to the potential for personal injury when you see this safety-alert symbol.
On your machine safety labels, the words DANGER, WARNING, and CAUTION are used with safety-
alert symbol.
DANGER identifies the most serious hazards. In this manual, the word CAUTION and this symbol call
attention to safety messages.
Identification machine
Identification plate machine
Machine safety labels
1) WARNING: AVOID INJURY FROM ROTATING KNIVES:
• Keep hands, feet and clothing away.
2) WARNING: AVOID INJURY FROM PTO:
• Keep all shields in place. Keep hands, feet and clothing away.
• Operate only with 540 RPM.
3) CAUTION: AVOID INJURY
• Read Operator’s Manual
• Ballast power unit per operator’s manual
• Know location and function of controls
• Keep all shields in place
• Stay clear of power driven parts
• Never carry riders
• Keep people and pets a safe distance away from machine
BEFORE DISMOUNTING OR SERVICING
• Shut off engine and remove key
• Lock brake for park
• Lower or block up machine
4) DANGER: ROTATING DRIVELINE - CONTACT CAN CAUSE DEATH - KEEP AWAY! - DO NOT
OPERATE WITHOUT:
• All driveline, tractor and equipment shields in place
• Drivelines securely attached at both ends
• Drivelines shields that turn freely on driveline.
5) DANGER: SHIELD MISSING DO NOT OPERATE
Picture Note: Separate telescoping driveshaft members to locate safety label. Label attached to outer profile
tube.
Safety Signs - Page 5
|